How Jeans Are Made: From Cotton Yarn to Finished Denim
November 16, 2026 · 6-minute read
A pair of jeans goes through a long chain of steps before it reaches a store: cotton is spun into yarn, the lengthwise yarns are dyed with indigo, the yarns are woven into denim, and the denim is finished, cut, sewn, and usually washed. Each step shapes how the jeans look, feel, and fit, including whether they stretch.

Spinning the Yarn
Denim yarns are spun on two main systems, ring spinning and open-end spinning. Before the late 1970s, all denim yarns were ring spun. Today denim combines the two in different ways, and terms like “ring/OE” name the warp yarn first and the filling yarn second, so ring/OE means a ring-spun warp and an open-end filling. Mixing the two can lower the cost of a fabric while keeping some of the qualities of ring-spun denim. Spinning machines can also add deliberate thick places called slubs, which give denim a rougher, uneven look.1
Dyeing the Warp with Indigo
Most denim is a yarn-dyed fabric, with the warp yarns, which run the length of the fabric, dyed with indigo and the filling yarns left undyed. Indigo is insoluble in water, so it is first chemically reduced to a soluble form that is pale greenish yellow. The yarn absorbs the dye, and when it is exposed to air, the dye oxidizes back to blue and is trapped in the outer layers of the yarn. Each pass through the dye and the air adds only a little color, so the yarn is dipped repeatedly, normally three to twelve times, to build up a deep blue.1
Indigo has a very low affinity for cotton, so it concentrates in the outer layers of the yarn and leaves an intense ring of color around a white core, a process called ring dyeing. With most other dyes, this would count as a defect. In rope dyeing, 12 to 36 ropes of yarn run side by side through baths that first scour the cotton and then dye it. For darker or different shades, a sulfur dye can be applied before the indigo, called a sulfur bottom, or after it, called a sulfur top. Some mills dye the yarn as a flat sheet instead, which works well for lightweight denim, and some denim is left undyed and can be bleached to make white denim.1
Sizing and Weaving
Before weaving, the warp yarns are coated with size, a protective coating, traditionally made from starch, that reduces abrasion on the loom and keeps the indigo from rubbing off. Most denim warp yarns carry 7 to 14% size by weight. In many denim styles, the size is left on the fabric, which accounts for the stiffness of some new jeans.1
Denim is woven as a twill, such as a 3/1 twill, in which each warp yarn passes over three filling yarns and then under one. Each warp yarn starts the sequence one filling yarn higher than the one beside it, which produces the diagonal twill line. When the line rises to the right, the fabric is a right-hand twill, and when it rises to the left, a left-hand twill. Older shuttle looms have largely been replaced by machines that carry the filling yarn across with projectiles, rapiers, or jets of air, and most denim is woven on projectile or air-jet machines. Finished denim weighs from 3.5 to 16.5 ounces per square yard, and the heavier fabrics, from 8 to 16.5 ounces, are used for jeans, trousers, and jackets.1 For more on twills and other weaves, see Knit vs. Woven Fabric.
Finishing the Fabric
Woven denim is finished before it is cut. It is usually singed, passed over a flame to burn off loose surface fibers, and it may be washed, desized, or mercerized. It is then stretched to its set width and its filling yarns are straightened or angled, which helps keep the legs of finished jeans from twisting in the wash. The last step is compressive shrinking, often called sanforizing: the damp fabric is pressed against a cylinder by a rubber belt, which shortens it so that it shrinks no more than about 1% afterward.2 Raw, or shrink-to-fit, denim skips this pre-shrinking, and Levi’s says its 501 Shrink-to-Fit jeans shrink by about 1 inch in the waist and up to 2 to 3 inches in length, depending on how they are washed.3
Cutting and Sewing
The finished fabric is cut into panels and sewn into jeans. The metal rivets on many jeans date to the 1870s. Jacob Davis, a tailor in Reno, Nevada, who made horse blankets fastened with rivets, added rivets to a pair of workpants. In 1872 he wrote to Levi Strauss & Co. proposing that they seek a patent together, and on May 20, 1873, they received one for an “Improvement in Fastening Pocket-Openings.”4
Washing the Jeans
Washing newly sewn jeans is a standard finishing step. A first wash removes the size, and stone washing, in which jeans tumble with pumice stones, fades the indigo to give a worn look and makes the denim softer and more flexible. Pumice alone can wear and tear the garment, so it is often combined with cellulase enzymes.5
Faded and worn areas have been made by hand sanding, by spraying with potassium permanganate, and by sandblasting, which many brands, retailers, and countries have banned because of its effects on workers’ health. Lasers can now make the same looks. Because indigo sits on the surface of the yarn, a laser can remove the blue layer to reveal the white core, and the 3/1 twill is sturdy enough to lose that surface without losing its structure. Designs are loaded as digital files, which gives more consistent results.6
How Stretch Is Added
Stretch denim gets its stretch from core-spun yarn. A spandex filament is fed into the spinning machine, and cotton fibers twist around it to form an elastic yarn with a spandex core.1 This core-spun yarn is used as the weft yarn, which gives the fabric stretch and helps prevent wrinkles. Only a small amount of spandex is needed. In one study of stretch denim, spandex made up about 1.8 to 2.5% of the weft yarns, wrapped in cotton or a cotton and polyester blend, while the warp was 100% cotton.7
Spandex, called elastane outside the United States, is described in Synthetic Fibers in Clothing.
Reading the Label
On a U.S. fiber content label, fibers are listed by generic name and percentage of weight, in order of predominance. Fibers that make up less than 5% are normally grouped as “other fiber,” but a fiber under 5% can be named with its percentage when it has a definite functional significance at that amount. The Federal Trade Commission (FTC) gives spandex used for elasticity as an example.8
That is why stretch jeans often list something like “98% cotton, 2% spandex,” while jeans made only of cotton read “100% cotton.” Denim without a stretch fiber has a low stretch capacity, partly because of the weight of the fabric, and it is more prone to wrinkles.7 For more on fiber content labels, see How to Read a Clothing Fiber Content Label.
References
Cotton Incorporated. (2004). Denim Fabric Manufacturing (ISP 1010). https://www.cottoninc.com/wp-content/uploads/2017/12/ISP-1010-Denim-Fabric-Manufacturing.pdf
van Wersch, K. (2018). A Concept For Denim Finishing Possibilities — Stretching, Skewing And Compressive Shrinking. Textile World. https://www.textileworld.com/textile-world/2018/01/a-concept-for-denim-finishing-possibilities-stretching-skewing-and-compressive-shrinking/
Levi Strauss & Co. (2025). How to Shrink Raw Denim Jeans. https://www.levi.com/US/en_US/blog/article/how-to-shrink-raw-denim-jeans
Panek, T. (2024). The Truth — and Exaggerations — of LS&Co. Levi Strauss & Co. https://www.levistrauss.com/2024/06/11/truth-and-exaggerations-of-lsco/
Mondal, M. I. H., Khan, M. M. R., & Ahmed, M. F. (2016). Physico-Mechanical Properties of Finished Denim Garment by Stone-Enzymatic Treatment. Journal of Textile and Apparel, Technology and Management, 10(1). https://jtatm.textiles.ncsu.edu/index.php/JTATM/article/view/9352
Cotton Incorporated. (2020). Laser Applications on Cotton Textiles (TRI 4011). https://cottonworks.com/wp-content/uploads/2021/02/TRI-4011-Laser-Applications-on-Cotton-Textiles.pdf
Akter, N., Repon, M. R., Mikučionienė, D., Jalil, M. A., Islam, T., & Karim, M. R. (2021). Fabrication and characterization of stretchable denim fabric using core spun yarn. Heliyon, 7(12), e08532. https://doi.org/10.1016/j.heliyon.2021.e08532
Federal Trade Commission. (2014, updated 2025). Threading Your Way Through the Labeling Requirements Under the Textile and Wool Acts. https://www.ftc.gov/business-guidance/resources/threading-your-way-through-labeling-requirements-under-textile-wool-acts